ISONEM MS POLYMERis a state-of-the-art pure polymer, ready to
use and possessing a 300% shiny elastic structure which is resistant to
UV.

MS POLYMER

Quantity

Used as insulating material on terraces, roofs, balconies and wet areas, screeds, facades, surfaces applied by thermal insulation with sprayed polyurethane.
SURFACE PREPARATION:

Apply the primer: ISONEM MS POLYMER or ISONEM UNIVERSAL PRIMER according to the proportions and supports indicated. Primers: On marble, ceramics: ISONEM UNIVERSAL PRIMER 1 coat of 100 to 200g/m2: it is therefore necessary to dilute 1 volume of primer for 7 volumes of water. On other substrates: ISONEM MS POLYMER: 1 coat of 100 - 200 g/m2: dilution to 1 for 2 doses of water, drying for 1 hour.

APPLICATION METHOD:

ISONEM MS POLYMER is ready to use. Apply it in two perpendicular layers with an interval of 4 hours.

TOOL CLEANING:

Clean all tools and application equipment with clean water immediately after use.

Density (25°C, g/mL)	1.00 ± 0.10
pH (25°C)	7.0 – 9.0
Viscosity (25°C, mPa.s)	13000 – 15000
Solids content (% wt)	46±2
Water transmission rate (kg/m2.h0.5)	< 0.1 CLASS W3
Adhesive strength by tes d'arrachage (N/mm2)	Crack bridging of flexible systems without traffic ≥ 0.8
Water vapor permeability (m)	5 ≤ SD ≤ 50 CLASS II
Contactless drying	3h
Through-drying time	72h
Solvent	Water
Reaction to fire class	B S1 d0
Color	All colors
Media Types	Concrete, plaster, roughcast, stone, marble, ceramic, wood

Job