SURFACE PREPARATION:
Repair cracks, concrete defects and rod holes with ISONEM M03 For large spans and thermally insulated floors, apply 45 g/m2 of insulating mesh to floors prone to cracking. Do not use in areas of salt efflorescence or where water runs down the negative side of the wall. Fill the dilations with ISONEM A4. Apply the recommended Primers: On all substrates except metal: ISONEM UNIVERSAL PRIMER: 100-200g/m2, diluted to 1 part primer for 7 parts water. drying 1 hour On metal: ISONEM ANTI RUST PRIMER 1 coat 250 to 350g/m2.
APPLICATION METHOD:
Apply and let dry the primer according to the proportions and supports indicated. Before any application, make sure that the slope is sufficient, especially on flat roofs, and that the water drainage is correct, without accumulation of water. ISONEM MS POLIA is ready to use. Mix it evenly. Apply it in two perpendicular layers without dilution at 4 hour intervals.
TOOL CLEANING:
Clean all tools and application equipment with water immediately after application.